Radio Inhibit |
(Conventional System, Features) |
Enables the radio to receive a remote Inhibit signal while operating on the current Conventional System. This inhibit signal is a shutdown command sent from the dispatcher unit. Upon receipt of this command, the radio transmits a quick acknowledgement to the dispatch equipment. The radio then goes into a dormant state during which the receiver audio is muted and the transmit audio path is blocked. While inhibited all radio-user controls are rendered inoperative; Scan mode is stopped on the operating mode / channel which received the command, and all Radio LED’s are turned off.
|
In order to clear the inhibited state of the radio, send an uninhibit command to the radio or redo the Read/Write process of the radio. |
(When the System Type field is set to "DVRS" or "MDC")
Or
(When the System Type field is set to "ASTRO", and
when the Remote Site Interface System field is disabled.)
